Users Guide

FEFD system log message reference
This section lists the system log messages that are generated by the FEFD process.
Table 20. FEFD system log messages
System log message Severity Description Recommended action
%FEFD_OUT_OF_MEM: FEFD:
Out of Memory
Informational The system is running out of memory.
System is out of memory.
Reduce processes if possible.
Contact your technical
support representative for
further analysis.
%FEFD_ERROR_SET: Interface
set to FEFD Error :
Informational This error is set when FEFD port
is unable to detect neighbor FEFD
peer after 3* interval time configured.
Interface set to FEFD Error:
Enable FEFD on the peer
node port.
%FEFD_ERROR_CLR: Interface
cleared from FEFD Error :
Informational If the FEFD port is set
to FEFD_ERROR_SET and FEFD
configuration is removed, then this
indicates that the error set previously
was removed. Interface cleared from
FEFD error.
No action required.
%FEFD_PORT_BIDIRECTION_DE
TECTED: Interface has Bi-
directional link with its peer :
Informational This is informational log to show if
FEFD peer is detected. Interface has
Bi-directional link with its peer :
No action required.
21
42 FEFD system log message reference