Users Guide

Table 18. FC_SVCS system log messages (continued)
System log message Severity Description Recommended action
teared down sessions get logged in
successfully within the 30 second time
period. After that if there is any state
change deducted like enode logged out
or uplink going down then this log is
raised.
%FC_SVCS_NPG_SLB_NOT_SU
CCESS: Re-balance
Informational This log is raised when the operations
got timed-out (30 seconds) for the
Vfabric-ID. i.e the sessions did not re-
login.
Try executing the re-balance
npg sessions again if issue
still persits, shut/no shut the
enode ports.
%FC_SVCS_NPG_SLB_NOT_SU
CCESS_STATE_CHANGE: Re-
balance
Informational when a user executes the re-balance
npg session, it computes the session
distribution. Based on the computation
it starts tearing down the session, also
30 second timer starts. The teared
down sessions not logged in back and
a state change like enode port down,
uplink port down or uplink port added
then this log will be raised.
Execute the re-balance npg
sessions again to get the
system into balanced state.
%FC_SVCS_MS_CLASSF_ZERO
_CREDIT_TIMEOUT: CLASS-F:
Informational This log is displayed when credit for
selected CLASS-F frames becomes
zero and does not recover for 10
seconds.
This is the info to customer
and Auto recovery in place.
%FC_SVCS_MS_CLASSF_ACK1
_TIMEOUT: CLASS-F:
Informational This log is displayed if ACK1 is not
received from destination domain for 1
second.
This is the info to customer
and Auto recovery in place.
%FC_SVCS_MS_CLASSF_WAIT
_TIMEOUT: CLASS-F:
Informational This log is displayed when we are
about to send frame to destination
domain but credit is 0 for 10 second.
This is the info to customer
and Auto recovery in place.
%FC_SVCS_MS_FSPF_FSM:
FSPF:
Informational This log is displayed with port id and
vfabric id when domain id allocated
and FSPF reaches FULL state.
No action required.
%FC_SVCS_ERR_POOL_MALLO
C_FAIL: Memory allocation failed
Critical System is out of memory. Check the memory
usage. Verify the switch
configurations are done
within the recommended
limits Report to customer-
support if issue not resolved.
%FC_SVCS_FC_FABRIC_UPDAT
E: Update
Informational This log is displayed when there is an
N_port logged in or logged out to the
F port device.
No action required.
FC_SVCS system log message reference 39