Users Guide

DCBX system log messages
This section lists the system log messages that the DCBX process generates.
Table 11. DCBX system log messages
System log message Severity Description Recommended action
%DCBX_PFC_PORT_OPER_UP:
PFC Parameters MATCH on
interface
Informational PFC configuration of remote port
matches local PFC configuration.
No action required.
%DCBX_PFC_PORT_OPER_DO
WN: PFC Parameters
MISMATCH on interface
Informational PFC configuration of remote
port does not match local PFC
configuration.
Check local and remote PFC
configuration.
%DCBX_ETS_PORT_OPER_UP:
ETS Parameters MATCH on
interface
Informational ETS configuration of the remote
port matches the local ETS
configuration.
No Action Required.
%DCBX_ETS_PORT_OPER_DO
WN: ETS Parameters
MISMATCH on interface
Informational ETS configuration of remote
port does not match local ETS
configuration.
Check local and remote ETS
configurations.
%DCBX_PEER_ETS_STATE_CH
G: ETS Peer state change
Informational When there is a change in ETS state.
(enable or disable)
No action required.
%DCBX_PEER_PFC_STATE_CH
G: PFC Peer state change
Informational When there is change in PFC state.
(enable or disable)
No action required.
%DCBX_PEER_VER_CONFLICT:
DCBX Peer version conflict on
Informational Remote port has different version of
DCBX.
Check the version of DCBX
on local and remote port.
%DCBX_UNRECOGNIZED_TLV:
Received Unrecognized DCBX
TLV
Informational DCBX TLV is not recognized. Contact technical support for
further assistance.
%DCBX_PFC_MAX_CAP_EXCE
EDED: Peer PFC Capability
exceeded max limit.
Warning PFC enabled priorities are greater
than maximum supported.
Contact your technical
support for further assistance
on the local and remote
ports.
%DCBX_ETS_RECV_CONFIG_E
RROR: Peer ETS config error
Warning Indicates that there is an error in the
remote ETS configuration.
Check the remote port
ETS configuration. Contact
Technical Support for
assistance.
12
28 DCBX system log messages