Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsSmartFabric OS10 Documentation
981982983984985986987988989990
Table Of Contents
● Dest RtrID—Displays the destination router ID.
● Interface—Displays the interface type.
● Prefix—Displays the prefix details.
Example
OS10# show ipv6 ospf database
OSPF Router with ID (10.0.0.2) (Process ID 200)
Router Link States (Area 0.0.0.0)
ADV Router Age Seq# Fragment ID Link count Bits
-------------------------------------------------------------------
1.1.1.1 1610 0x80000144 0 1 B
2.2.2.2 1040 0x8000013A 0 1
10.0.0.2 1039 0x80000002 0 1
Net Link States (Area 0.0.0.0)
ADV Router Age Seq# Link ID Rtr count
----------------------------------------------------------
2.2.2.2 1045 0x80000001 5 2
Inter Area Router States (Area 0.0.0.0)
ADV Router Age Seq# Link ID Dest RtrID
---------------------------------------------------------------
1.1.1.1 1605 0x80000027 1 3.3.3.3
Link (Type-8) Link States (Area 0.0.0.0)
ADV Router Age Seq# Link ID Interface
--------------------------------------------------------------------
1.1.1.1 1615 0x80000125 5 ethernet1/1/1
2.2.2.2 1369 0x8000011B 5 ethernet1/1/1
10.0.0.2 1044 0x80000001 5 ethernet1/1/1
Type-5 AS External Link States
ADV Router Age Seq# Prefix
--------------------------------------------------------------------------
3.3.3.3 3116 0x80000126 400::/64
3.3.3.3 3116 0x80000124 34::/64
OS10# show ipv6 ospf database
Type-5 AS External Link States
ADV Router Age Seq# Prefix
Tag
-----------------------------------------------------------------------
11.1.1.1 436 0x8000008E 100:1:2::/64
100
Supported
Releases
10.3.0E or later
show ipv6 ospf interface
Displays the configured OSPFv3 interfaces. You must enable OSPFv3 to display the output.
Syntax
show ipv6 ospf interface interface [vrf vrf-name]
Parameters
● interface — (Optional) Enter the interface information:
○ ethernet — Physical interface, from 1 to 48.
○ port-channel — Port-channel interface, from 1 to 128.
○ vlan — VLAN interface, from 1 to 4093.
● vrf vrf-name — (Optional) Enter the keyword vrf followed by the name of the VRF to display
the configured OSPFv3 enabled interfaces in that VRF.
Default Not configured
Command Mode EXEC
Example
OS10# show ipv6 ospf interface
ethernet1/1/1 is up, line protocol is up
Link Local Address fe80::20c:29ff:fe0a:d59/64, Interface ID 5
Area 0.0.0.0, Process ID 200, Instance ID 0, Router ID 10.0.0.2
Network Type broadcast, Cost: 1
982 Layer 3