Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsSmartFabric OS10 Documentation
391392393394395396397398399400
Table Of Contents
show interface switchport
Displays the physical and port channel interfaces that are VLAN bridge ports or switch ports.
Syntax
show interface switchport [interface]
Parameters interface—(Optional) Enter the interface type:
● ethernet node/slot/port[:subport]—Display Ethernet interface information.
● port-channel id-number—Display port channel interface IDs, from 1 to 128.
Default None
Command Mode EXEC
Usage
Information
Use this command to display the Layer 2 interfaces and their VLAN membership details.
Example
OS10# show interface switchport
Codes: A - Access (Untagged), T - Tagged
v - VLTi untagged, V - VLTi tagged
Name: Eth1/1/1
Description: connected-to-host
802.1QTagged: Hybrid
Vlan membership:
Q Vlans
A 1
T 2
Name: Eth1/1/2
802.1QTagged: False
Vlan membership:
Q Vlans
A 1
Name: Po1000
802.1QTagged: Hybrid
Vlan membership:
Q Vlans
v 1
V 2
Supported
Releases
10.5.2.3 or later
show inventory media
Displays installed media in switch ports.
Syntax
show inventory media
Parameters None
Command Mode EXEC
Usage
Information
Use the show inventory media command to verify the media type inserted in a port.
Example
OS10# show inventory media
-------------------------------------------------------------------
System Inventory Media
-------------------------------------------------------------------
Node/Slot/Port Category Media Serial Dell EMC
Number Qualified
-------------------------------------------------------------------
1/1/1 Not Present
398 Interfaces