Users Guide

Grandmaster Clock Identity : 00:11:00:ff:fe:00:00:01
Clock Mode : One-step
Clock Quality
Class : 248
Accuracy : <=25ns
Offset Log Scaled Variance : 0
Domain : 0
Priorityl : 128
Priority2 : 128
Profile : System-default
Steps Removed : 1
Mean Path Delay(ns) : 176
Offset From Master(ns) : -8
Number of Ports : 1
------------------------------------------------------
Interface State Port Identity
------------------------------------------------------
Ethl/1/1 Slave 20:04:0f:ff:ff:0d:5b:56:2
------------------------------------------------------
Number of slave ports :1
Number of master ports :0
9. Verify the PTP state and lock status.
switchA# show ptp servo
Servo State : Locked
Lock Status : Phase-locked
SyncE commands
clear sync-e counters
Resets the statistics of the ESMC packets received at or transmitted from an interface.
Syntax
clear sync-e counters [ethernet node/slot/port]
Parameters ethernet node/slot/port—(Optional) Enter a physical Ethernet interface.
Default None
Command Mode EXEC
Security and
Access
Netadmin and sysadmin
Usage
Information
The ethernet parameter is optional. If it is not specified, the counters are cleared on all the SyncE
interfaces.
Example
OS10# clear sync-e counters ethernet 1/1/1
Supported
Releases
10.5.2.1 or later
clear sync-e lockout
Clears the lockout state of a specific interface or all interfaces.
Syntax
clear sync-e lockout [ethernet node/slot/port]
Parameters ethernet node/slot/port—(Optional) Enter a physical Ethernet interface.
Default None
Command Mode EXEC
Security and
Access
Netadmin and sysadmin
240 System management