Users Guide

========================
CPUID 5Sec(%) 1Min(%) 5Min(%)
-------------------------------------------
Overall 9.09 8.58 9.09
PID Process Runtime(s) 5sec(%) 1min(%) 5min(%)
1387 dn_sm 243346 1.4 1.4 1.4
955 dn_pas_svc 243354 0.6 0.6 0.6
959 dn_dot1x 243354 0.2 0.2 0.2
1374 dn_lacp 243346 0.2 0.2 0.2
Supported
Releases
10.5.2.0 or later
show util-threshold cpu
Displays the configured CPU utilization threshold values.
Syntax
show util-threshold cpu
Parameters None
Defaults None
Command Mode EXEC
Usage
Information
This command displays the CPU utilization thresholds that trigger alarms. When the CPU utilization
percentage across different time durations crosses the threshold values, an alarm generates. To
reconfigure the threshold values, use the util-threshold cpu command.
Example
OS10# show util-threshold cpu
Processor 5Sec(%) 1Min(%) 5Min(%)
High Low High Low High Low
====================================================
Overall 0 0 10 5 80 70
Supported
Releases
10.5.2.0 or later
util-threshold cpu
Sets the CPU utilization threshold values.
Syntax
util—threshold cpu cpu-utilization-time threshold threshold-percentage
Parameters
● cpu-utilization-time—Set the CPU threshold time:
○ 1min—Set threshold to 1-minute CPU utilization.
○ 5min—Set the threshold to 5-minute CPU utilization.
○ 5sec—Set the threshold to 5-second CPU utilization.
● threshold—Set the high and low threshold:
○ high—Set the threshold to high.
○ low—Set the threshold to low.
● threshold-percentage—Enter the threshold percentage, from 0 to 100.
Default
● High CPU utilization threshold: 1min = 85%, 5min = 80%
● Low CPU utilization threshold: 1min = 75%, 5min = 70%
Command Mode CONFIGURATION
Usage
Information
The system triggers an alarm each time the configured CPU threshold is crossed. Setting both high and
low thresholds to 0 disables CPU utilization monitoring.
The no version of this command returns the CPU thresholds to the default values.
1824 Troubleshoot Dell EMC SmartFabric OS10