Reference Guide

DNS address resolution
OS10(config)# ip dhcp server
OS10(conf-dhcp)# pool Dell
OS10(conf-dhcp-Dell)# domain-name dell.com
OS10(conf-dhcp-Dell)# dns-server 192.168.1.1
OS10(conf-dhcp-Dell)# do commit
NetBIOS WINS address resolution
DHCP clients can be one of four types of NetBIOS nodes — broadcast, peer-to-peer, mixed, or hybrid. Dell EMC recommends using hybrid
as the NetBIOS node type.
1 Enable DHCP server-assigned dynamic addresses on an interface in DHCP <POOL> mode.
ip dhcp server
2 Create an IP address pool and enter the pool name in DHCP mode.
pool name
3 Enter the NetBIOS WINS name servers in order of preference that are available to DHCP clients in DHCP <POOL> mode.
netbios-name-server ip-address
4 Enter the keyword Hybrid as the NetBIOS node type in DHCP <POOL> mode.
netbios-node-type type
5 Save the conguration.
do commit
Congure NetBIOS WINS address resolution
OS10(config)# ip dhcp server
OS10(conf-dhcp)# pool Dell
OS10(conf-dhcp-Dell)# netbios-name-server 192.168.10.5
OS10(conf-dhcp-Dell)# netbios-node-type Hybrid
OS10(conf-dhcp-Dell)# do commit
Manual binding entries
Address binding is mapping between the IP address and the media access control (MAC) address of a client. The DHCP server assigns the
client an available IP address automatically and then creates an entry in the binding table. You can also manually create an entry for a client.
Manual bindings help to guarantee that a particular network device receives a particular IP address.
Consider manual bindings as single-host address pools. There is no limit to the number of manual bindings, but you can only congure one
manual binding per host. Manual binding entries do not display in the show ip dhcp binding output.
1 Create an address pool in DHCP mode.
pool name
2 Enter the client IP address in DHCP <POOL> mode.
host address
3 Enter the client hardware address in DHCP <POOL> mode.
hardware-address hardware-address
4 Save the conguration.
do commit
Congure manual binding
OS10(config)# ip dhcp server
OS10(conf-dhcp)# pool static
OS10(conf-dhcp-static)# host 20.1.1.2
338
System management