Manualshelf

Connectivity Guide

ManualsBrandsDell ManualsAccess PlatformsSmartFabric OS10 Documentation
971972973974975976977978979980
Table Of Contents
show qos system
Displays the QoS configuration applied to the system.
Syntax
show qos system
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
View and verify system-level service-policy configuration information.
Example
OS10# show qos system
ETS Mode : off
ECN Mode : off shows whether the ECN is enabled globally or not
Service-policy (Input) (qos) : policy1
Service-policy (Output)(queuing) : policy2
Supported
Releases
10.4.1.0 or later
show qos system buffers
Displays the system buffer configurations and utilization.
Syntax
show qos system {ingress | egress} buffers
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show qos system ingress buffer
All values are in kb
Total buffers - 12187
Total lossless buffers - 0
Maximum lossless buffers - 5512
Total shared lossless buffers - 0
Total used shared lossless buffers -
Total lossy buffers - 11567
Total shared lossy buffers - 11192
Total used shared lossy buffers - 0
The following command is supported on Z9100-ON and Z9264F-ON platforms:
OS10# show qos system ingress buffer detail
All values are in kb
Total buffers - 43008
Total lossless buffers - 0
Maximum lossless buffers - 23312
Total shared lossless buffers - 0
Total used shared lossless buffers -
Total lossy buffers - 42388
Total shared lossy buffers - 39974
Total used shared lossy buffers - 0
MMU 0
Total lossy buffers - 10597
Total shared lossy buffers - 10012
Total used shared lossy buffers - 0
MMU 1
978
Quality of service