Connectivity Guide

Default 0
Command Mode TRUST-MAP
Usage
Information
If the trust map does not define traffic class values to a queue, those flows map to the default queue 0. If
some of the traffic class values are already mapped to an existing queue, you see an error. The no version
of this command returns the value to the default.
Example
OS10(conf-tmap-tc-queue-qos)# queue 2 qos-group 5
Supported
Releases
10.3.0E or later
random-detect (interface)
Assigns a WRED profile to the specified interface.
Syntax
random-detect wred-profile
Parameters wred-profile — Enter the name of an existing WRED profile.
Default Not configured
Command Mode INTERFACE
Usage
Information
The no version of this command removes the WRED profile from the interface.
Example
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# random-detect test_wred
Supported
Releases
10.4.0E(R1) or later
random-detect (queue)
Assigns a WRED profile to the specified queue.
Syntax
random-detect wred-profile-name
Parameters wred-profile-name — Enter the name of an existing WRED profile.
Default Not configured
Command Mode PMAP-C-QUE
Usage
Information
The no version of this command removes the WRED profile from the queue.
Example
OS10(config)# policy-map type queuing p1
OS10(config-pmap-queuing)# class c1
OS10(config-pmap-c-que)# random-detect test_wred
Supported
Releases
10.4.0E(R1) or later
random-detect color
Configures the threshold of WRED profile for available colors.
Syntax
random-detect color color-name minimum-threshold minimum-value maximum-
threshold maximum-value drop-probability drop-rate
Quality of service 963