Connectivity Guide

Standby SW Version: 10.4.3E
Standby SW Build Version: 10.4.3E.80
Standby Build Date/Time: 2019-02-17T15:36:08Z
Next-Boot: active[A]
View boot summary
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
-----------------------------------------------------------------------------------
Node-id 1 Flash Boot [A] 10.4.3E [B] 10.4.3E [A] active
Upgrade commands
boot system
Sets the boot partition to use during the next reboot.
Syntax
boot system {active | standby}
Parameters
● active — Reset the running partition as the next boot partition.
● standby — Set the standby partition as the next boot partition.
Default Active
Command Mode EXEC
Usage
Information
Use this command to configure the location of the OS10 image used to reload the software at boot
time. Use the show boot command to view the configured next boot image. This command applies
immediately and does not require the commit command.
Example
OS10# boot system standby
Supported
Releases
10.2.0E or later
image cancel
Cancels an active image download.
Syntax
image cancel
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
This command attempts to cancel an active file download in progress.
Example
OS10# image cancel
Supported
Releases
10.2.0E or later
System management 87