Connectivity Guide

[organization organization-name] [orgunit unit-name] [cname common-name]
[email email-address] [validity days] [length length] [altname alt-name]
Parameters
● request — Create a certificate signing request to copy to a CA.
● self-signed — Create a self-signed certificate.
● cert-file cert-path — (Optional) Enter the local path where the self-signed certificate or
CSR will be stored. You can enter a full path or a relative path; for example, flash://certs/
s4810-001-request.csr or usb://s4810-001.crt. If you do not enter the cert-file
option, the system interactively prompts you to fill in the remaining fields of the certificate signing
request. Export the CSR to a CA using the copy command.
● key-file {key-path | private} — Enter the local path where the downloaded or locally
generated private key will be stored. If the key was downloaded to a remote server, enter the server
path using a secure method, such as HTTPS, SCP, or SFTP. Enter private to store the key in a local
hidden location.
● country 2-letter-code — OPTIONAL) Enter the two letter code that identifies the country.
● state state — Enter the name of the state.
● locality city — Enter the name of the city.
● organization organization-name — Enter the name of the organization.
● orgunit unit-name — Enter name of the unit.
● cname common-name — Enter the common name assigned to the certificate. Common name is the
main identity presented to connecting devices. By default, the switch’s host name is the common
name. You can configure a different common name for the switch; for example, an IP address. If the
common-name value does not match the device’s presented identity, a signed certificate does not
validate.
● email email-address — Enter a valid email address used to communicate with the organization.
● validity days — Enter the number of days for which the certificate is valid. For a CSR, validity
has no effect. For a self-signed certificate, the default is 3650 days or 10 years.
● length bit-length — Enter a bit value for the keyword length. For FIPS mode, the range is from
2048 to 4096; for non-FIPS mode, the range is from 1024 to 4096. The default key length for both
FIPS and non-FIPS mode is 2048 bits. The minimum key length value for FIPS mode is 2048 bits. The
minimum key length value for non-FIPS mode is 1024 bits.
● altname altname — Enter an alternate name for the organization; for example, using the IP
address such as altname IP:192.168.1.100.
Default
Not configured
Command mode EXEC
Usage
information
Generate a CSR when you want a CA to sign a host certificate. Generate a self-signed certificate if you
do not set up a CA and implement a certificate trust model in your network.
If you enter the cert-file option, you must enter all the following required parameters, including the
local path where the certificate and private key are stored.
If you do not specify the cert-file option, you are prompted to fill in the other parameter values for
the certificate interactively; for example:
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a
DN.
There are quite a few fields but you can leave some blank.
For some fields there will be a default value; if you enter '.', the
field will be left blank.
Country Name (2 letter code) [US]:
State or Province Name (full name) [Some-State]:California
Locality Name (eg, city) []:San Francisco
Security 803