Manualshelf

Connectivity Guide

ManualsBrandsDell ManualsAccess PlatformsSmartFabric OS10 Documentation
791792793794795796797798799800
Table Of Contents
CommonName = GeoTrust Universal CA
IssuerName = GeoTrust Universal CA
2. Generate a CSR, copy the CSR to a CA server, download the signed certificate, and install the host certificate.
OS10# crypto cert generate request cert-file home://s4048-001.csr key-file home://
tsr6.key cname "Top of Rack 6" altname "IP:10.0.0.6 DNS:tor6.dell.com" email
admin@dell.com organization "Dell EMC" orgunit Networking locality "Santa Clara" state
California country US length 1024
Processing certificate ...
Successfully created CSR file /home/admin/tor6.csr and key
OS10# copy home://tor6.csr scp://CAadmin:secret@172.11.222.1/s4048-001-csr.pem
OS10# copy scp://CAadmin:secret@172.11.222.1/s4048-001.crt usb://s4048-001.crt
OS10# crypto cert install crt-file usb://s4048-001.crt key-file usb://s4048-001.key
This will replace the already installed host certificate.
Do you want to proceed ? [yes/no(default)]:yes
Processing certificate ...
Host certificate installed successfully.
3. Configure an X.509v3 security profile.
OS10# show crypto cert
-------------------------------------
| Installed non-FIPS certificates |
-------------------------------------
s4048-001
-------------------------------------
| Installed FIPS certificates |
-------------------------------------
OS10# config terminal
OS10(config)# crypto security-profile secure-cluster
OS10(config-sec-profile)# certificate s4048-001
OS10(config-sec-profile)# exit
4. Configure the cluster security profile
OS10(config)# cluster security-profile secure-cluster
OS10(config)# exit
X.509v3 commands
certificate
Configures a certificate and private key pair in an application-specific security profile.
Syntax
certificate certificate-name
Parameters certificate-name — Enter the name of the certificate-key pair as it appears in the show crypto
certs output without the .pem extension.
Default Not configured
Command mode SEC-PROFILE
Usage
information
Use the certificate command to associate a certificate and private key with a security profile.
An application-specific security profile allows you to change the certificate-key pair used by an OS10
application, such as SmartFabric services, without interrupting the service of other mission-critical
applications.
When you install a certificate-key pair, both take the name of the certificate. Enter the certificate-key
pair name without an extension as the certificate-name value. The no form of the command
removes the certificate-key pair from the profile.
800 Security