Connectivity Guide

Parameters None
Default Disabled
Command Mode CONFIGURATION
Usage
Information
Only the sysadmin and secadmin roles have access to this command. When enabled, user login
information, including the number of successful and failed logins, role changes, and the last time a user
logged in, displays after a successful login. The no login-statistics enable command disables
login statistics.
Example
OS10(config)# login-statistics enable
Supported
Releases
10.4.0E(R1) or later
password-attributes
Configures rules for password entries.
Syntax
password-attributes {[min-length number] [character-restriction {[upper
number] [lower number] [numeric number] [special-char number]}}
Parameters
● min-length number — (Optional) Sets the minimum number of required alphanumeric characters,
from 6 to 32; default 9.
● character-restriction:
○ upper number — (Optional) Sets the minimum number of uppercase characters required, from
0 to 31; default 0.
○ lower number — (Optional) Sets the minimum number of lowercase characters required, from 0
to 31; default 0.
○ numeric number — (Optional) Sets the minimum number of numeric characters required, from
0 to 31; default 0.
○ special-char number — (Optional) Sets the minimum number of special characters required,
from 0 to 31; default 0.
Default
● Minimum length: 9 characters
● Uppercase characters: 0
● Lowercase characters: 0
● Numeric characters: 0
● Special characters: 0
Command Mode EXEC
Usage
Information
● By default, the password you configure with the username password command must be at least
nine alphanumeric characters.
● Use this command to increase password strength. When you enter the command, at least one
parameter is required. When you enter the character-restriction parameter, at least one
option is required.
● To reset parameters to their default values, enter the no password-attributes command.
Example
OS10(config)# password-attributes min-length 6 character-restriction
upper 2 lower 2 numeric 2
Supported
Releases
10.4.0E(R1) or later
password-attributes max-retry lockout-period
Configures a maximum number of consecutive failed login attempts and the lockout period for the user ID.
Syntax
password-attributes {[max-retry number] [lockout-period minutes]}
Security 777