Connectivity Guide

Default 22
Command Mode CONFIGURATION
Usage
Information
The no version of this command removes the configuration.
Example
OS10(config)# ip ssh server port 255
Supported
Releases
10.3.0E or later
ip ssh server pubkey-authentication
Enable public key authentication in an SSH server.
Syntax
ip ssh server pubkey-authentication
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage
Information
The no version of this command disables the public key authentication.
Example
OS10(config)# ip ssh server pubkey-authentication
Supported
Releases
10.3.0E or later
ip ssh server vrf
Configures an SSH server for the management or non-default VRF instance.
Syntax
ip ssh server vrf {management | vrf vrf-name}
Parameters
● management — Configures the management VRF instance to reach the SSH server.
● vrf vrf-name — Enter the keyword vrf followed by the name of the VRF to configure that
non-default VRF instance tp reach the SSH server.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
By default, the SSH server is enabled.
Example
OS10(config)# ip ssh server vrf management
OS10(config)# ip ssh server vrf vrf-blue
Supported
Releases
10.4.0E(R1) or later
line vty
Enters the virtual terminal line mode to access the virtual terminal (VTY).
Syntax
line vty
Parameters None
Security 775