Manualshelf

Connectivity Guide

ManualsBrandsDell ManualsAccess PlatformsSmartFabric OS10 Documentation
71727374757677787980
Table Of Contents
Software version : 10.4.3.0
Product Base :
Product Serial Number :
Product Part Number :
Unit Type Part Number Rev Piece Part ID Svc Tag Exprs Svc Code
-------------------------------------------------------------------------------------------------
* 1 S4048ON 0J09D3 X01 TW-0J09D3-28298-49Q-0119 FFD7VS1 335 809 304 65
1 S4048ON-PWR-2-UNKNOWN 0T9FNW X01 TW-0T9FNW-28298-49Q-0041 AEIOU## 226 457 410 55
1 S4048ON-FANTRAY-1 0MGDH8 X01 TW-0MGDH8-28298-49Q-0361 AEIOU## 226 457 410 55
1 S4048ON-FANTRAY-2 0MGDH8 X01 TW-0MGDH8-28298-49Q-0360 AEIOU## 226 457 410 55
1 S4048ON-FANTRAY-3 0MGDH8 X01 TW-0MGDH8-28298-49Q-0359 AEIOU## 226 457 410 55
Supported
Releases
10.2.0E or later
show ip management-route
Displays the IPv4 routes used to access the Management port.
Syntax
show ip management-route [all | connected | summary]
Parameters
● all — (Optional) Display the IPv4 routes that the Management port uses.
● connected — (Optional) Display only routes directly connected to the Management port.
● summary — (Optional) Display the number of active and non-active management routes and their
remote destinations.
● static — (Optional) Display non-active management routes.
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to view the IPv4 static and connected routes configured for the Management port.
Use the management route command to configure an IPv4 or IPv6 management route.
Example
OS10# show ip management-route
Destination Gateway State Source
-----------------------------------------------------------------
192.168.10.0/24 managementethernet Connected Connected
Supported
Releases
10.2.2E or later
show ipv6 management-route
Displays the IPv6 routes used to access the Management port.
Syntax
show ipv6 management-route [all | connected | summary]
Parameters
● all — (Optional) Display the IPv6 routes that the Management port uses.
● connected — (Optional) Display only routes directly connected to the Management port.
● summary — (Optional) Display the number of active and non-active management routes and their
remote destinations.
● static — (Optional) Display non-active Management routes.
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to view the IPv6 static and connected routes configured for the Management port.
Use the management route command to configure an IPv4 or IPv6 management route.
74 Getting Started