Connectivity Guide

no
Disables or deletes commands in EXEC mode.
Syntax
no [alias | debug | support-assist-activity | terminal]
Parameters
● alias — Remove an alias definition.
● debug — Disable debugging.
● support-assist-activity — SupportAssist-related activity.
● terminal — Reset terminal settings.
Default Not configured
Command Mode EXEC
Usage
Information
Use this command in EXEC mode to disable or remove a configuration. Use the no ? in
CONFIGURATION mode to view available commands.
Example
OS10# no alias goint
Supported
Releases
10.2.0E or later
reload
Reloads the software and reboots the ONIE-enabled device.
Syntax
reload
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
NOTE: Use caution while using this command as it reloads the OS10 image and reboots the device.
Example
OS10# reload
Proceed to reboot the system? [confirm yes/no]:y
Supported
Releases
10.2.0E or later
show alias
Displays configured alias commands available in both Persistent and Non-Persistent modes.
Syntax
show alias [brief | detail]
Parameters
● brief — Displays brief information of the aliases.
● detail — Displays detailed information of the aliases.
Default None
Command Mode EXEC
Usage
Information
None
Example
OS10# show alias
Name Type
---- ----
Getting Started 69