Connectivity Guide

Command Mode EXEC
Usage
Information
Use this command to install the Enterprise Edition license file. For more information, see Download OS10
image and license. OS10 requires a perpetual license to run beyond the 120-day trial period. The license
file is installed in the /mnt/license directory.
Example
OS10# license install scp://user:userpwd/10.1.1.10/CFNNX42-NOSEnterprise-
License.lic
License installation success.
Supported
Releases
10.3.0E or later
line (alias)
Configures the commands to be executed in a multi-line alias.
Syntax
line nn command
Parameters
● nn — Enter the line number, from 1 to 99. The commands are executed in the order of the line
numbers.
● command — Enter the command to be executed enclosed in double quotes.
Default Not configured
Command Mode ALIAS
Usage
Information
The no version of this command removes the line number and the corresponding command from the
multi-line alias.
Example
OS10(config)# alias mTest
OS10(config-alias-mTest)# line 1 "interface $1 $2"
OS10(config-alias-mTest)# line 2 "no shutdown"
OS10(config-alias-mTest)# line 3 "show configuration"
Supported
Releases
10.4.0E(R1) or later
lock
Locks the candidate configuration and prevents any configuration changes on any other CLI sessions, either in Transaction or
Non-Transaction-Based Configuration mode.
Syntax
lock
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
The lock command fails if there are uncommitted changes in the candidate configuration.
Example
OS10# lock
Supported
Releases
10.2.0E or later
Getting Started 67