Connectivity Guide

Lock configuration changes
OS10# lock
Unlock configuration changes
OS10# unlock
Change to transaction-based configuration mode
To change to Transaction-Based Configuration mode for a session, enter the start transaction command.
1. Change to Transaction-Based Configuration mode in EXEC mode.
start transaction
2. Enable, for example, an interface from INTERFACE mode.
interface ethernet 1/1/1
no shutdown
3. Save the configuration.
do commit
NOTE: After you enter the do commit command, the current session switches back to the default behavior of
committing all configuration changes automatically.
Save configuration changes manually
OS10# start transaction
OS10# configure terminal
OS10(config)#
OS10(config)# interface ethernet 1/1/1
OS10(config-if-eth1/1/1)# no shutdown
OS10(config-if-eth1/1/1)# do commit
Copy running configuration
The running configuration contains the current OS10 system configuration and consists of a series of OS10 commands. Copy
the running configuration to a remote server or local directory as a backup or for viewing and editing. The running configuration
is copied as a text file, which you can view and edit with a text editor. To copy the running configuration to the startup
configuration file, enter the copy running-configuration startup-configuration command.
Copy running configuration to local directory or remote server
OS10# copy running-configuration {config://filepath | home://filepath |
ftp://userid:passwd@hostip/filepath | scp://userid:passwd@hostip/filepath |
sftp://userid:passwd@hostip/filepath | tftp://hostip/filepath}
OS10# copy running-configuration scp://root:calvin@10.11.63.120/tmp/qaz.txt
Copy file to running configuration
To apply a set of commands to the current running configuration and execute them immediately, copy a text file from a
remote server or local directory. The copied commands do not replace the existing commands. If the copied command fails, the
successful copied commands before the failure is maintained.
OS10# copy {config://filepath | home://filepath |
ftp://userid:passwd@hostip/filepath | scp://userid:passwd@hostip/filepath |
sftp://userid:passwd@hostip/filepath | tftp://hostip/filepath | http://userid@hostip/
50
Getting Started