Connectivity Guide

show lldp interface
Displays the LLDP information advertised from a specific interface.
Syntax
show lldp interface ethernet node/slot/port[:subport] [med | local—device]
Parameters
● ethernet node/slot/port[:subport] — Enter the Ethernet interface information.
● med — Enter the interface to view the MED information.
● local-device — Enter the interface to view the local-device information.
Default None
Command Mode EXEC
Usage
Information
Use the med parameter to view MED information for a specific interface. Use the local-device
parameter to view inventory details.
Example
OS10# show lldp interface ethernet 1/1/5
ethernet1/1/5
Tx State : Enabled
Rx State : Enabled
Tx SEM State : initialize
Rx SEM State : wait-port-operational
Notification Status : Disabled
Notification Type : mis-configuration
DestinationMacAddr : 01:80:c2:00:00:0e
Example (Local
Device)
OS10# show lldp interface ethernet 1/1/1 local-device
Device ID: 00:0c:29:e5:aa:f4
Port ID: ethernet1/1/1
System Name: OS10
Capabilities: Bridge Router
System description: Dell networking Operating system
Port description: Connected to end point device
Time To Live: 120
LLDP MED Capabilities: Capabilities, Network Policy
LLDP MED Device Type: Network connectivity
Example (MED)
OS10# show lldp interface ethernet 1/1/20:1 med
Port |Capabilities|Network Policy|Location|Inventory|POE
----------------|------------|--------------|--------|---------|---
ethernet1/1/20:1| Yes| Yes| No| No| No
Network Polices :
Supported
Releases
10.2.0E or later
show lldp errors
Displays the LLDP errors related to memory allocation failures, queue overflows, and table overflows.
Syntax
show lldp errors
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show lldp errors
Total Memory Allocation Failures: 0
296 Layer 2