Connectivity Guide

Parameters fcf-mac-address — (Optional) Enter the MAC address of the FCF. This option displays details of the
specified FCF.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show fcoe fcf
FCF MAC FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No.
of Enodes FCF Mode
-------- ------------- ------ ------- --------------
------------- --------
00:0c:84:a8:00:00 Eth 1/1/36 777 0e:fc:00 8000 0
F
00:0d:84:a8:01:02 Eth 1/1/37 778 0e:fc:01 8000 0
FT
Supported
Releases
10.4.0E(R1) or later
show fcoe pinned-port
Displays the port-channel, the corresponding pinned-port configuration, and the port status if the FCoE sessions are formed.
Syntax
show fcoe pinned-port [port-channel port-channel-id]
Parameters port-channel-id—Enter the port-channel ID to display the corresponding configuration.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show fcoe pinned-port
Interface pinned-port FCoE Status
----------------- ---------------- -----------------
Po 10 Eth 1/1/1 Up
Po 20 Eth 1/1/3 Up
Po 30 Eth 1/1/7 Down
Supported
Releases
10.4.2.0 or later
show fcoe sessions
Displays the details of the established FCoE sessions.
Syntax
show fcoe sessions [interface vlan vlan-id]
Parameters vlan-id — (Optional) Enter the VLAN ID. This option displays the sessions established on the specified
VLAN.
Default Not configured
Command Mode EXEC
240 Fibre Channel