Connectivity Guide

Supported
Releases
10.4.1 or later
show ip dhcp binding
Displays the DHCP binding table with IPv4 addresses.
Syntax
show ip dhcp binding
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to view the DHCP binding table.
Example
OS10# show ip dhcp binding
IP Address Hardware address Lease expiration Hostname
+-----------------------------------------------------
11.1.1.254 00:00:12:12:12:12 Jan 27 2016 06:23:45
Total Number of Entries in the Table = 1
Supported
Releases
10.2.0E or later
DNS commands
OS10 supports the configuration of a DNS host and domain parameters.
ip domain-list
Adds a domain name to the DNS list. This domain name appends to incomplete hostnames in DNS requests.
Syntax
ip domain-list [vrf vrf-name] [server-name] name
Parameters
● vrf vrf-name — (Optional) Enter vrf and then the name of the VRF to add a domain name to the
DNS list corresponding to that VRF.
● server-name — (Optional) Enter the server name to add a domain name to the DNS list.
● name — Enter the name of the domain to append to the DNS list.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
There is a maximum of six domain names to the DNS list. Use this domain name to complete unqualified
host names. The no version of this command removes a domain name from the DNS list.
Example
OS10(config)# ip domain-list jay dell.com
Supported
Releases
10.2.0E or later
ip domain-name
Configures the default domain and appends to incomplete DNS requests.
Syntax
ip domain-name [vrf vrf-name] server-name
136 System management