Connectivity Guide

Example
OS10# show vlt 255 backup-link
VLT Backup Link
------------------------
Destination : 10.16.208.164
Peer Heartbeat status : Up
Heartbeat interval : 1
Heartbeat timeout : 3
Supported
Releases
10.3.1E or later
show vlt mac-inconsistency
Displays inconsistencies in dynamic MAC addresses learnt between VLT peers across spanned-vlans.
Syntax
show vlt mac-inconsistency
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to check for a mismatch of MAC address table entries between VLT peers. To verify
VLT configuration mismatch issues on peer switches, use the show vlt domain-name mismatch
command.
Example
OS10# show vlt-mac-inconsistency
Checking Vlan 228 .. Found 7 inconsistencies .. Progress 100%
VLAN 128
----------
MAC 00:00:00:00:00:02 is missing from Node(s) 2
VLAN 1
----------
MAC 00:a0:c9:00:00:18 is missing from Node(s) 2
MAC 00:a0:c9:00:00:20 is missing from Node(s) 2
VLAN 131
----------
MAC 00:00:00:00:00:02 is missing from Node(s) 2
VLAN 132
----------
MAC 00:00:00:00:00:02 is missing from Node(s) 2
VLAN 135
----------
MAC 00:00:00:00:00:02 is missing from Node(s) 2
VLAN 137
----------
MAC 00:00:00:00:00:02 is missing from Node(s) 2
Run "show vlt d1 mismatch ..." commands to identify configuration issues
Supported
Releases
10.2.0E or later
show vlt mismatch
Displays mismatches in a VLT domain configuration.
Syntax
show vlt id mismatch [peer-routing | vlan | vlt-vlan vlt-port-id | virtual-
network]
Parameters
● id — Enter the VLT domain ID, from 1 to 255.
● peer-routing — Display mismatches in peer-routing configuration.
● vlan — Display mismatches in a VLAN configuration in the VLT domain.
1014 Virtual Link Trunking