Users Guide

Associating Dell Servers With FX2 CMC Devices

You can view and monitor the health of the classified in-band or out-of-band modular servers and their

corresponding RACs that are associated with FX2 CMC devices in the Nodes view of the HPOM console.

1. Click Nodes → Dell Managed Systems → Dell Chassis → FX2 CMC → FX2 CMC Node (Service Tag).

2. Expand the FX2 CMC (Chassis Service Tag) node.

All the FX2 CMC slots of the classified Dell servers and its RACs associated with that FX2 CMC Device

are displayed.

The FX2 CMC slots are represented as follows:

SLOT <number> - <Server Service Tag>

NOTE: For Dell PowerEdge FM120x4 server nodes associated with FX2 CMC devices, the

Server Node ID is used in the slot representation as shown below:

3. Click a service tag to view the managed nodes of the servers and their corresponding RACs that are

associated with FX2 CMC.

Associating Dell EqualLogic Blade Array With CMC Devices

You can view and monitor the health of the Dell EqualLogic Blade Arrays that are associated with CMC

devices in the Nodes view of the HPOM console.

1. Click Nodes → Dell Managed Systems → Dell Chassis → CMC → CMC Node (Chassis Service Tag).

2. Expand the CMC Node (Chassis Service Tag).

The CMC slots of the discovered modular EqualLogic Blade Arrays associated with that CMC device

are displayed.

NOTE: The CMC slots are represented as follows:

SLOT <number> - < SLOT Name (EqualLogic Service Tag)>

Example: SLOT 3/4 - SNAC (3ZKXS2F)

3. Click the required service tag to view the associated Dell EqualLogic Blade Array member node.

Association Of Blade IO (Dell M-Series Switches) With CMC Devices

You can view and monitor the health of the Dell M-Series network switches that are associated with CMC

devices in the Nodes view of the HPOM console.

1. Click Nodes → Dell Managed Systems → Dell Chassis → CMC → CMC Node (Service Tag) → IO

Modules

2. Expand IO Modules.

The service tags of the Dell M-Series network switches associated with the CMC devices are

displayed under the chassis tag of the CMC device.

3. Click the required IO Module to view the associated Dell M-Series network switch.