Setup Guide

Prerequisites For Installing The Dell SPI
The requirements for installing the Dell SPI are as follows:
• Install Dell SPI only on HPOM 9.0 for Windows management server.
• Ensure that you have administrator and HP_OVE_ADMIN privileges on the HPOM management
server.
• Ensure that you have WinRM privileges to monitor Dell systems running ESXi.
• Ensure that .Net Framework 3.5 is installed on the management server.
Software Requirements For Management Server
The following table lists the software requirements for the management server.
Table 1. Software Requirements For The Management Server
Requirement Description
Operating systems supported by Dell SPI for
HPOM 9.0 for Microsoft Windows
Dell SPI for HPOM 9.0 for Microsoft Windows
supports the following operating systems:
• Windows Server 2012
• Windows Server 2008 R2 SP1
• Windows Server 2008 R2
HPOM 9.0 for Microsoft Windows with the latest
HPOM 9.0 patches
For more information about installing HPOM, see
the HP Operations Manager 9.0 Installation Guide
available on the HP support website.
Trap Interceptor with SNMPv2 If you want to monitor the SNMPv2 traps from Dell
devices, then configure the HPOM trap interceptor
to receive SNMPv2 traps. For more information,
see Configure SNMP conditions section in HP
Operations Manager online help.
SNMP Service If you want to monitor the SNMPv1 traps from Dell
devices, install and enable SNMP Service. For more
information, see Related Documents.
WinRM 2.0 service
Install and configure WinRM version 2.0 or later to
establish communication with the Dell ESXi
systems that you are monitoring. For more
information, see Configuring User Authorization
For WinRM.
Dell Connections License Manager (DCLM) Install and configure the licensing server for
monitoring Dell Out-of-Band (OOB) servers. For
more information, see Dell Connections License
Manager Installation Guide at support.dell.com/
manuals.
5