Setup Guide

Option Description

-wsmanpassword

Specifies the password for the user name you

specified.

-wsmancacheck

Skips the authentication of Certificate Authority

that issued the certificate. The value is either yes

or no. The default value is no. If you set the value

to yes, then the authentication of Certificate

Authority is checked.

-wsmancncheck

Skips authentication of the Common Name (CN).

The value is either yes or no. The default value is

no. If you set the value to yes, then the Common

Name is checked.

-wsmanrevocationcheck

Specifies a value to indicate whether the WSMAN

connection should validate the revocation status

of the server certificate or not. The value is either

yes or no. The default value is no. If you set the

value to yes, then the revocation status of the

server certificate is checked.

-wsmantimeout

Specifies WSMAN timeout value in milliseconds.

The default value is 30000 (30 seconds). Set a

value between 500 milliseconds to 4294967290

milliseconds.

Using The Dell SPI Configuration Utility

To use the Dell SPI configuration utility:

1. Launch a command prompt on the management server.

2. Navigate to DellSPIConfigUtility.exe.

The default location is C:\Program Files\Dell\OpenManage Connection for HP.

3. To set any of the parameters, listed in Table 4. of the above section, for the supported Dell Devices,

type the following command:

DellSPIConfigUtility.exe -<option>=<value> and press Enter.

For example, if you want to set the WSMAN timeout, type the following command:

DellSPIConfigUtility.exe -wsmantimeout=500

You must set the values for wsmanusername and wsmanpassword if you are monitoring the ESXi

systems. You can also set the values to launch the Dell OpenManage Server Administrator Web

Server Console.

When you specify the value for wsmanpassword , type the following command:

DellSPIConfigUtility.exe -wsmanpassword and press Enter. While specifying the

wsmanpassword,

• You do not need to specify = after -wsmanpassword.

• When you modify the password, the utility prompts you to enter the old password and then the

new password twice.