Quick Start Manual

Requirement Description

node. For more information, see Related Documents and

What To Do Next?

SNMP agent Configure the SNMP agent to change the community

name, enable Get operations, and send traps to the HPOM

management server.

Configure the SNMP service trap destination to receive

traps on the management server.

For more information on configuring the SNMP agent on

Windows and Linux systems, see Related Documents.

Server Administrator The supported versions of Server Administrator are:

• For Windows systems — versions 6.2 to 7.1

• For ESXi and Linux systems — versions 6.2 to 7.1

Install Server Administrator on ESXi and enable the OEM

CIM providers and ensure that the management server

can communicate with the systems.

For more information on configuring SNMP for Windows,

ESXi, and Linux systems, or on enabling the OEM CIM

providers, see Related Documents.

Supported Firmware Versions

The following table lists the supported firmware versions for DRAC, iDRAC, CMC, DRAC/MC, EqualLogic, and MD

Storage Array devices.

Table 3. Supported Firmware Versions For DRAC, CMC, EqualLogic and MD Storage Array Devices

Dell Device Firmware Versions Supported

iDRAC6 11G Monolithic 1.8 and 1.9

iDRAC6 11G Modular 3.3 and 3.4

iDRAC7 1.10.10 and 1.20.20

DRAC 5 1.5 and 1.6

CMC 4.0 and 4.1

DRAC/MC 1.5 and 1.6

EqualLogic 5.2.1 and 5.2.2

MD Storage Array 7.35 (MD3000), 7.75, and 7.80 (all others including Hogs 2.0)

Configuring User Authorization For WinRM

To configure user authorization for WinRM:

1. Click Start → Run on the Windows menu of the system.

2. Type winrm configsddl default and click OK.

3. Click Add to add the required local or domain users or groups to the list.

4. Provide the appropriate permission(s) to the respective users and click OK.