Quick Start Manual

ManualsBrandsDell ManualsSoftwareDell Smart Plug-in Version 3.0 For HP Operations Manager 9.0 For Microsoft Windows

Option Description

individual parameters except wsmanusername,

wsmanpassword,dclmusernameand

dclmpassword and displays them on the screen.

-resetdefaults

Resets all the configurable values to the default values.

NOTE: This option does not reset the values for the-

wsmanusername,-

wsmanpassword,dclmusernameand

dclmpassword options.

-help

Displays the help for using this tool.

-wsmanusername

Specifies user name of a local or a domain account on the

ESXi system. This property determines the user name for

authentication to access the ESXi system.

-wsmanpassword

Specifies the password for the user name you specified.

-wsmancacheck

Skips the authentication of Certificate Authority that

issued the certificate. The value is eitheryes or no. The

default value is no. If you set the value to yes, then the

authentication of Certificate Authority is checked.

-wsmancncheck

Skips authentication of the Common Name (CN). The

value is either yes orno. The default value is no. If you

set the value to yes, then the common name is checked.

-wsmanrevocationcheck

Specifies a value to indicate whether the WSMAN

connection should validate the revocation status of the

server certificate or not. The value is either yes orno.

The default value is no. If you set the value to yes, then

the revocation status of the server certificate is checked.

-wsmantimeout

Specifies WSMAN timeout value in milliseconds. The

default value is 30000 (30 seconds). Set a value between

500 milliseconds to 4294967290 milliseconds.

Using The Dell SPI Configuration Utility

To use the configuration utility:

1. Launch a command prompt on the management server.

2. Navigate to DellSPIConfigUtility.exe . The default location is C:\Program Files\Dell\OpenManage Connection for HP.

3. Type the following command:

DellSPIConfigUtility.exe -<option>=<value> and press Enter.

For example, if you want to set the WSMAN timeout, type the following command:

DellSPIConfigUtility.exe -wsmantimeout=500

NOTE: If you enter invalid values, the utility displays the error message with the help text.

You must set the values for wsmanusername and wsmanpassword if you are monitoring the ESXi systems.

You must also set the value for the Web Server Console.