Quick Start Manual

What To Do Next?
After you complete installing the Dell SPI, configure the SNMP parameters for Dell Windows, Linux Servers, Dell DRAC,
Dell Chassis, EQL devices, DCLM parameters for OOB server monitoring, and WSMAN parameters for ESXi systems to
ensure that communication between the management server and the Dell systems is established correctly. To configure
the communication parameters, run the DellSPICongfigUtility.exe that is part of the Dell SPI installer.
You can configure the following:
• SNMP timeout and retries
• Server Administrator Web Server Console URL
• Warranty Report URL
• DCLM Parameters:
– Webservice URL
– Username
– Password
• WSMAN Connection Parameters:
– Username
– Password
– Timeout
– Security options that include Certificate Authority check, Common Name check, and Revocation check
NOTE: You can configure the Warrany Report URL, DCLM Webservice URLand the Server Administrator Web
Server Console URL according to the environment.
The following table lists the command line options to set the different values for SNMP, Server Administrator Web
Server Console URL,WSMAN, DCLM, and Warranty Report URL.
Table 4. Command Line Options
Option Description
-snmptimeout
Specifies the SNMP timeout in milliseconds. The default
value is 5000 (5 seconds). Set a value between 100
milliseconds to 4294967290 milliseconds.
-snmpretries
Specifies the number of SNMP retries. The default value
is 1.
- dwsurl
Specifies the DWS URL.
-dclmwebserviceurl
Specifies the DCLM webservice URL.
Example: http://dclmserver.domain.com:8543/
-dclmusername
Specifies the dclm username for logging in with basic
authentication.
Example: domain\username
-dclmpassword
Specifies the dclm password for logging in with basic
authentication.
-getall
Specifies the values of all the options and display them on
the screen. This option gets all the values for all the
11