book.
book.book Page 2 Thursday, October 7, 2010 3:45 PM Notes and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. ____________________ Information in this document is subject to change without notice. © 2010 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
book.book Page 3 Thursday, October 7, 2010 3:45 PM Contents 1 Trap Correlation Overview . . . . . . . . . . . . . . . . . . . . 5 . . . . . . . . . . . . . . . . . . . . . . . . . 5 Instrumentation Traps . . . . . . . . . . . . . . . . . . . Miscellaneous Traps . . . . . . . . . . . . . . . . . Temperature Probe Traps 6 . . . . . . . . . . . . . . 6 . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . 7 Cooling Device Traps . Voltage Probe Traps 5 Amperage Probe Traps .
book.
book.book Page 5 Thursday, October 7, 2010 3:45 PM Trap Correlation Overview This reference guide provides detailed information about the SNMP traps generated by Dell OpenManage Server Administrator (OMSA) that are displayed as messages on the HP Operations Manager (HPOM) console. It is intended for system administrators who use HPOM to monitor Dell systems. The SNMP Interceptor policy has predefined rules for processing all the OMSA and OpenManage Storage Systems (OMSS) traps sent by the Dell systems.
book.book Page 6 Thursday, October 7, 2010 3:45 PM Miscellaneous Traps Table 2-1 lists Miscellaneous traps that inform you that certain alert systems are up and working. Table 2-1.
book.book Page 7 Thursday, October 7, 2010 3:45 PM Cooling Device Traps Cooling device traps monitor how well a fan is functioning. Table 2-3.
book.book Page 8 Thursday, October 7, 2010 3:45 PM Amperage Probe Traps Amperage probes measure the amount of current (in amperes) that is traversing critical components. Table 2-5.
book.book Page 9 Thursday, October 7, 2010 3:45 PM Redundancy Unit Traps Redundancy indicates that a system chassis has more than one of certain critical components. Fans and power supplies, for example, are so important for preventing damage or disruption of a computer system that a chassis may have "extra" fans or power supplies installed. Redundancy allows a second or nth fan to keep the chassis components at a safe temperature when the primary fan has failed.
book.book Page 10 Thursday, October 7, 2010 3:45 PM Memory Device Traps Memory device messages provide status and warning information for memory modules present in a particular system. Memory devices determine health status by counting the number of ECC memory corrections. NOTE: A value of failure or non-recoverable does not indicate a system failure or loss of data, but rather that the specified system exceeded the specified ECC correction threshold. Table 2-9.
book.book Page 11 Thursday, October 7, 2010 3:45 PM AC Power Cord Traps The AC power cord sensor monitors the presence of AC power for an AC power cord. AC power cord traps provide status and warning information for power cords that are part of an AC power switch, if your system supports AC switching. Table 2-11.
book.book Page 12 Thursday, October 7, 2010 3:45 PM Processor Device Status Traps The BMC on some systems reports the status of processor devices. Processor device status traps provide status and warning information for processor devices present in a system with a BMC that reports the status of processor devices. Table 2-13.
book.book Page 13 Thursday, October 7, 2010 3:45 PM Battery Traps The BMC on some systems reports the status of batteries. Battery traps provide status and warning information for batteries present in a system with a BMC that reports the status of batteries. Table 2-15.
book.
