Owner's Manual

Introduction 5
1
Introduction
This guide provides quick installation instructions for Dell Smart Plug-
in(SPI) Version 2.0 for HP Operations Manager 9.0 for Microsoft Windows.
NOTE: This plug-in is applicable to 64 bit systems.
Pre-requisites
The pre-requisites for installing the Dell Smart Plug-in are as follows:
• Administrator and HP_OVE_ADMIN privileges on the HP Operations
Manager (HPOM) management server.
• WinRM privileges to monitor Dell ESXi systems.
Install the following software on the Management server:
Table 1-1. Software Requirements for Management Server
Requirement Description
HPOM 9.0 For more information on installing HPOM, see the HP
Operations Manager 9.0 Installation Guide available on the
HP Support website.
SNMP Service Install and enable SNMP. For more information, see
Related
Documents .
WinRM 2.0 service Install and configure WinRM version 2.0 or above to
establish communication with the Dell ESXi systems that
you are monitoring. For more information, see Configuring
User Authorization for WinRM
.
DellSPIv2.0_QIG.book Page 5 Thursday, March 3, 2011 2:13 PM