Owner's Manual

30 Using Dell Smart Plug-in (SPI)
• Groups the PowerEdge and PowerVault systems under two broad
categories according to the hardware configuration—
Dell Monolithic
Systems
and Dell Modular Systems
• Dell Modular Systems —Creates a group with the Chassis Service tag
as the name of the group. All the blade servers belonging to the same
chassis are grouped under the
Chassis Service tag group.
•
Dell Monolithic Systems —Groups all the monolithic servers.
•Creates
Dell Windows Servers service group for the Windows systems,
Dell ESXi Servers service group for the ESXi systems, and the Dell Linux
Servers
service group for the Linux systems in the Service Map view on the
HPOM console
• Creates the
SNMP Traps service and Global System Status service
corresponding to each server under the
Dell Windows Servers, Dell ESXi
Servers,
and the Dell Linux Servers service groups. The SNMP Traps
service displays the severity status of the system based on SNMP traps and
the Global System Status service displays the severity status of the system
based on server health poll. For more information see, "SNMP Trap Based
Severity Propagation" on page 33
NOTE: To know the actual health of the Dell system, view the status in the
Global System Status service.
To view the Dell systems in the Service Map view:
a Select Systems Infrastructure under Services in the HPOM console.
The Service Map view is displayed on the right pane.
b Click Dell Hardware and click Dell Windows Servers, Dell ESXi
Servers,
or Dell Linux Servers.
The Service Map view displays all the Dell systems that are grouped
under
Dell Modular Systems and Dell Monolithic Systems .
HP-OMUG.book Page 30 Thursday, October 7, 2010 4:42 PM