Owner's Manual

22 Installing and Uninstalling the Dell Smart Plug-in
Using the Modify Option in the Installer
The Modify option in the Dell SPI installer, modifies the program features
that are installed. This option retains the schedules you have set for the
various policies and enables you to perform the following actions:
• Install a feature that you did not install earlier
• Remove a feature that you have installed earlier
To install a feature that you did not install earlier:
1
Disable all the Dell SPI policies that are running on the management
server in the HPOM console.
2 Run the Dell Smart Plug-In v1.1.msi from the extracted folder.
The
Welcome screen is displayed.
3 Click Next. The installer displays three options.
4 Select the Modify option. The Custom screen is displayed.
5 In the custom screen, select Monitor Dell Windows Servers , Monitor
Dell ESXi Servers,
or Monitor Dell Linux Servers, or select the feature
that you did not install earlier and click
Next.
6 Click Install .
When the installation process completes, click
Finish .
To remove a feature that you had installed earlier:
1 Repeat steps 1– 4 mentioned in the previous procedure.
2 In the Custom screen, select the feature that you want to remove.
3 Click the feature and select the option This feature will not be available
and click
Next.
4 Click Install . The installer removes the feature from the HPOM
management server.
HP-OMUG.book Page 22 Thursday, October 7, 2010 4:42 PM