Setup Guide

Thales Data Security Manager (DSM)
28 Enable OpenManage Secure Enterprise Key Manager (SEKM) on Dell EMC PowerEdge Servers
3.3 Configure the Key Management Server (KMS) settings on iDRAC
1. Enter or select data in the fields, and then click Apply.
Configure the KMS properties on the iDRAC GUI
Note—User Authentication is not supported on Thales Vormetic Data Security Manager, so the User ID
and Password fields on iDRAC GUI are not required.
2. Go to the Job Queue page and ensure that the job ID is marked as successfully completed.
3. If you see any job status failures, view Lifecycle Logs for more information about the failure.
A job is created on iDRAC for configuring KMS on iDRAC
The iDRAC SEKM configuration is now complete.
3.3.1 Enable SEKM on the iDRAC PERC
1. On the iDRAC GUI, click Configuration  Storage Configuration.
2. Select the storage controller.
3. Expand Controller Configuration.
4. From the Security (Encryption) down-down menu, select Secure Enterprise Key Manager.