Release Notes

13 Dell PowerEdge VRTX Networking | Version 1.6
VRTX Switch Module Login Screen
4. Enter the default Username: root and Password: calvin, and click Submit in the
login screen to display the VRTX Switch Module Home page.
Notes:
1. Dell EMC recommends setting a unique username and password.
2. By default, the 1GbE and 10GbE switch module obtains its IP address from the local
DHCP server. However, the IP address can be assigned statically by selecting the <Setup>
entry from the I/O Module Overview page. Changing this IP address will result in the current
connection no longer working until the new IP address is used in the browser.
2.3 Configuring VLANs
Note: The following information applies to the 1GbE switch module. The steps to configure
the 10GbE switch module are similar (only the port numbering changes).
1. Expand Switching→VLAN in the VRTX Switch Module Home page’s left pane and
click VLAN Membership. See Figure 12.
2. Click Add in the VLAN membership pane.
3. Enter 10 in the VLAN ID field.
4. Enter Server node 1 in the VLAN name field.
5. Click Apply.
6. Repeat steps 1 – 5 to configure the VLAN 20 and server node 2 VLANs.