Setup Guide
Server Configuration Profiles: User’s Guide
64 Server Configuration Profiles: Reference Guide | 456
racadm>>lclogviewconfigresult‐jJID_035451979234
SeqNumber=8304
JobName=ImportConfiguration
MessageID=SYS064
Message=Inputfileforimportconfigurationisinvalidatline2911
If the line number is unclear, then it’s recommended to run the template through an external XML or JSON
validator to check for errors.
19.3.2 SYS051 – Unable to shut down in time
SYS051 - The system could not be shut down within the specified time.
The operating system can potentially deny or ignore the graceful shutdown request. If the SCP Import
operation times out this error, then consider the following options:
Increase the optional ‘Time to Wait’ parameter.
Use the Forced shutdown option.
Power down the host manually.
19.3.3 SYS055 – Completed with Errors
SYS055 - Import of Server Configuration Profile operation completed with errors.
SCP Import operations use a ‘continue on error’ policy. Detected errors will be reported to the LCL but the job
will continue to apply all settings. SCP Import has intelligent attribute dependency resolution and multiple
layers of retries to resolve all possible conflicts. However, any unresolved errors will be logged to the LCL.
The majority of issues will be reported in the configuration results. This includes schema validation issues
and dependency issues SCP Import was unable to resolve.
If the operation Completed with Errors and the reason is unclear from the configuration results, then it’s
recommended to review the iDRAC Lifecycle Logs for more information.
racadm>>jobqueueview‐iJID_041519610631
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐JOB‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
[JobID=JID_041519610631]
JobName=Configure:ImportServerConfigurationProfile
Status=CompletedwithErrors
ScheduledStartTime=[NotApplicable]
ExpirationTime=[NotApplicable]
ActualStartTime=[Sat,31Oct202008:46:01]
ActualCompletionTime=[Sat,31Oct202008:46:04]
Message=[SYS055:ImportofServerConfigurationProfile operationcompletedwitherrors.]
PercentComplete=[100]
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
racadm>>lclog
viewconfigresult‐jJID_041519610631
SeqNumber=10430
FQDD=LifecycleController.Embedded.1
JobName=ImportConfiguration
OperationName=CHANGE
DisplayValue=BIOSResetToDefaultsRequested
Name=LCAttributes.1#BIOSRTDRequested