Setup Guide

Server Configuration Profiles: User’s Guide
59 Server Configuration Profiles: Reference Guide | 456
racadm>>lclogviewconfigresult‐jJID_581182121065
SeqNumber=5966
FQDD=iDRAC.Embedded.1
JobName=ImportConfiguration
DisplayValue=SEKM.1#SEKMStatus
Name=SEKM.1#SEKMStatus
OldValue=Disabled
NewValue=Enabled
Status=Success
ErrCode=0
SeqNumber=5963

The SEKM certificate installation can be confirmed via the same configuration results by checking the
CertData and CertType attributes.

SeqNumber=5963
FQDD=iDRAC.Embedded.1
JobName=ImportConfiguration
DisplayValue=CertificateData
Name=SecurityCertificate.1#CertData
OldValue=******
NewValue=******
Status=Success
ErrCode=0
DisplayValue=CertificateType
Name=SecurityCertificate.1#CertType
OldValue=""
NewValue=KMS_SERVER_CA
Status=Success
ErrCode=0
DisplayValue
=CertificateData
Name=SecurityCertificate.2#CertData
OldValue=******
NewValue=******
Status=Success
ErrCode=0
DisplayValue=CertificateType
Name=SecurityCertificate.2#CertType
OldValue=""
NewValue=SEKM_SSL_CERT
Status=Success
ErrCode=0

NOTE: iDRAC SEKM attributes must be configured in a separate SCP Import operation (or another
interface) before enabling SEKM on a PERC device and creating a locked virtual disk. These operations
cannot be combined in a single SCP Import.