Setup Guide
Server Configuration Profiles: User’s Guide
56 Server Configuration Profiles: Reference Guide | 456
FQDD=iDRAC.Embedded.1
JobName=ImportConfiguration
OperationName=CHANGE
DisplayValue=iDRAC.Embedded.1#CustomComponents
Name=CustomComponents
OldValue=""
NewValue=""
Status=Failure
MessageID=SYS319
ErrCode=12562
16.3.2 Telemetry Not Enabled
If the Telemetry feature is not enabled, then the configuration results will show a SYS460 message ID for
CustomComponents.
SYS460 - Unable to perform the necessary telemetry operation because the Telemetry feature is disabled.
racadm>>lclogviewconfigresult‐jJID_034845831354
SeqNumber=8002
FQDD=iDRAC.Embedded.1
JobName=ImportConfiguration
OperationName=CHANGE
DisplayValue=iDRAC.Embedded.1#CustomComponents
Name=CustomComponents
OldValue=""
NewValue=""
Status=Failure
MessageID=SYS460
ErrCode=10376
16.3.3 Schema Validation Error
If the CustomComponents element is included in a template imported to any iDRAC before version iDRAC9
v4.40, then the resulting job status will be Failed with a message id of SYS047.
SYS047 - Input file for import configuration is not compliant with configuration schema.
racadm>>jobqueueview‐iJID_035451979234
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐JOB‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
[JobID=JID_035451979234]
JobName=Configure:ImportServerConfigurationProfile
Status=Failed
ScheduledStartTime=[NotApplicable]
ExpirationTime=[NotApplicable]
ActualStartTime=[Sat,24Oct202008:13:17]
ActualCompletionTime=[Sat,24Oct202008:13:18]
Message=[SYS047:Inputfileforimportconfigurationis notcompliantwithconfiguration
schema.]
PercentComplete=[100]