User's Manual

20 Using the Graphical User Interface
NOTE: You cannot use SUU to update any firmware or device driver installed on your
system that does not match a comparable repository component. You must manually
update components installed on your system that do not compare with the repository.
If the Upgrade, Downgrade, or Update button is disabled, one of the
following may apply:
• The components on your system are current and do not need to be upgraded.
• The prerequisite check failed. See "Prerequisites" for more information.
NOTE: If the Comparison Report displays the same package name for more than one
component in your system, and these components require an Upgrade, it means that a
single execution of the package is sufficient to update all the components. Therefore,
in the GUI, when you select/deselect one component, all other components that have
the same package name are selected/deselected by default.
Figure 2-8. SUU Comparison Report
In this figure, the firmware, driver, and the Dell OpenManage components
have been selected for an upgrade as the repository versions are newer than
the current versions installed on the system.
One of the firmware components (Dell Remote Access Controller 5
Firmware) is recommended for a downgrade as the currently installed version
is newer than the version in the repository.