User's Manual

Using the Graphical User Interface 27

To upgrade and downgrade components at the same time:

Select the

Enable System Set Update

check box. When you select this

check box, SUU disables the

Enable Downgrade

check box and the

Upgrade

button changes to the

Update

button as shown in Figure 2-12.

Figure 2-12. Enable Downgrade Check Box Disabled

All the components that can be updated are selected in the Comparison

Report.

NOTE: You cannot deselect individual components when you select the

Enable System Set Update check box.

Click the

Update

button. SUU displays a

Confirm Update

dialog box that

displays a list of components to be updated.

Click

Yes

to proceed with the update or

to cancel the update.

If you click

Yes

, SUU displays the

Update

dialog box that shows the

progress of the update.

Click

when the update is completed.

The updates are reflected in the Comparison Report.

NOTE: Do not click Update in SUU when the Comparison Report is displayed and

an application other than the SUU is updating your system components. In such a

scenario, restart SUU and then perform an update through SUU.

NOTE: The update status of some components will be effective only after you

restart your system.