Owner's Manual

procedure. Kernel panics or sudden reboots during DUP execution
(reboots where TERM signals are not sent to running processes or
where running processes do not have time to catch these signals)
can generate a "/var/lock/.spsetup" lock file that cannot be
deleted. SUU reports the update as successful and prompts you
to reboot the system. When you run SUU again on the same system,
the comparison reports no change in device status. If this
situation occurs and no update is in progress, remove
"/var/lock/.spsetup" before running another update on the system.
(137287)
* If a NIC teaming application is installed on the system, SUU updates
the NIC base driver only if the driver is compatible with the
teaming application. To verify driver compatibility, run DUP on the
system to update the driver and read the generated messages.(138648)
* Devices that are disabled in the operating system are not
inventoried or updated by SUU. To update or inventory these devices,
enable the devices in the operating system and then re-launch SUU.
(142111)
* Do not use the RAC/iDRAC virtual media to run SUU remotely on a system.
This procedure breaks the virtual media connection, causing the SUU
update procedure to fail. (144487)