###################################################################### DELL OPENMANAGE SERVER UPDATE UTILITY 7.2.0 README ###################################################################### This readme provides information for Dell OpenManage Server Update Utility version 7.2.0 This file also contains updated information for your "Dell OpenManage Server Update Utility User's Guide" and any other technical documentation that is included with Server Update Utility (SUU).
3 - Optional It is recommended that you review the update procedure to determine if it applies to your system. The update contains changes that may impact only certain configurations, or provides new features that may/may not apply to your environment.
* Microsoft Windows Server 2008 SP2 Foundation, Standard, Enterprise, and Datacenter and Web x86 and x64 Editions with SP2 * Microsoft Windows Small Business Server 2011 Essentials * Microsoft Windows Small Business Server 2011 Standard and Premium Editions * Microsoft Windows Essential Business Server 2008 Standard and Premium Editions (x64) with SP1 * Microsoft Windows Server 2008 R2 SP1 HPC Edition * Microsoft Windows Storage Server 2008 Basic, Standard, Enterprise and workgroup with SP2 * Microsoft Wind
Systems Software Support Matrix' is available at "www.dell.com/support/manuals." ====================================================================== SUPPORTED WEB BROWSERS ====================================================================== SUU 7.2.0 supports the following Web browsers: * Internet Explorer 9.0, Internet Explorer 8.0, Mozilla Firefox 12.0, Mozilla Firefox 11.0 and Mozilla Firefox 10.
M905,T100,M805,R300,R905,T605,R805,T300,M605, R200, M600, R900, T105 M610,T110II,R210II,M915,M710HD,R415,R515,M610x,R910,R815,M910,R810,R715,R310 T310,R510,R410,M710,T710,T410,R610,T610,R710 R720,T620,R620,M620,R720xd,M420, M520, R520,R420, R320, T420, T320, M820 SC1425, SC1435 SUU 7.2.
Note: Running SUU 7.2.0 on an unsupported system launches Repository Manager. Note: For a detailed table of supported Dell systems and operating systems, see the 'Dell Systems Software Support Matrix' available on the Dell Support website at www.dell.com/support/manuals. ###################################################################### INSTALLATION ###################################################################### SUU is a stand-alone application that runs directly from a DVD.
* When you launch SUU, the utility inventories the targeted system. Depending on the system configuration, this process may take several minutes to complete. (138439) * The figures and examples in the "Dell OpenManage Server Update Utility User's Guide" are used as examples only and may not be identical to the SUU GUI. (137294, 136624) * When you verify the SUU return codes, use the operating systemspecific commands to view the exit codes.
Enterprise Server 11 SP2 (BITS042723) * 64bit inventory collector will not be able to do the inventory to the SAS/SATA Backplane and SAS 6Gbps controller card on VMware, ESXi 4.
* Power Edge R520 doesn't have the firmware support for H310 Adaptor (BITS053313) * H710p Firmware MJY37 DUP update shows mismatch version, due to difference in payload version (21.1.0-0007) and package version (21.1.0-0006) - (BITS059978) * If your CERC ATA RAID controllers are configured with the H661 firmware, SUU cannot update the firmware to the latest version. To update the firmware, use the "-force" option to manually apply the DUP with the latest firmware version.
procedure. Kernel panics or sudden reboots during DUP execution (reboots where TERM signals are not sent to running processes or where running processes do not have time to catch these signals) can generate a "/var/lock/.spsetup" lock file that cannot be deleted. SUU reports the update as successful and prompts you to reboot the system. When you run SUU again on the same system, the comparison reports no change in device status. If this situation occurs and no update is in progress, remove "/var/lock/.
* SUU fails if it is run from a pathname that contains special characters. For example, ",:,/,\,$, etc. It is recommended to use a directory name without any special characters for running SUU. As an example, a case where you can get directory name with special characters is: In the SUSE Linux Enterprise Server operating system, when a USB DVD-ROM or USB disk is attached, it may by default, mount to a directory name that contains special characters.
directory on the Dell Systems Management Tools and Documentation DVD) to get the Intel NIC inventoried by SUU (DF130363). * When you try to execute SUU on a 64-bit RHEL operating system, it fails to execute since SUU is a 32-bit application. To work around this issue, manually install the following RPMs: glibc.i686 compat-libstdc++.i686 libstdc++.i686 zlib.i686 libxml2.i686 libXp.i686 libXtst.i686 ncurses-libs pam.i686 * If you use a Microsoft Windows Server 2003 operating system platform, you require .
automatically reduces the potential of security breaches. Before you run SUU on your system, elevate the privileges for administrators using Windows security options in Group Policy Editor. For more information, see the SUU User Guide. * Defect DF452489 - Export comparison report, in the file Dialogbox mouse movements are sluggish To work around the issue, ddd the following line: "*.multiClickTime: 500" to the file ~/.Xdefaults and run xrdb -merge ~/.
* To launch SUU on Linux x64-bit systems from windows CIFS share, user has to mount the extracted SUU x32 DVD CIFS share using "-o sce=nounix,noserverino" options on SUSE Linux Enterprise Server 10 & 11, Red Hat Enterprise Linux 6.2 & 6.3 OSes (BITS032613). ex: mount -t cifs -o sce=nounix,noserverino -o username= * SUU 7.2.
- Redistribution in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of Sun Microsystems, Inc. or the names of contributors may be used to endorse or promote products derived from this software without specific prior written permission. This software is provided "AS IS," without a warranty of any kind.
maintenance of any nuclear facility. ###################################################################### Information in this document is subject to change without notice. (C) 2004-2012 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell is strictly forbidden. Trademarks used in this text: Dell®, PowerEdge®, PowerVault®, and Dell OpenManage® are trademarks of Dell Inc.
implied or statutory, with respect to the utilities, including, but not limited to, the implied warranties of merchantability, fitness for a particular purpose, title and any warranty of non-infringement. Use the Server Update Utility at your own risk. Dell shall not be liable for any direct or indirect damages incurred in using the Server Update Utility.
