DELL OPENMANAGE SERVER UPDATE UTILITY 16.06.
Release Type and Definition This release notes provides information for Dell OpenManage Server Update Utility for Dell’s 10th generation of PowerEdge servers to Dell’s 13th generation of PowerEdge servers.
What is Supported SUPPORTED OPERATING SYSTEMS Microsoft Windows Operating Systems Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012, Essentials, Enterprise, Datacenter and Foundation x64 editions Microsoft Windows Server 2008 R2 Foundation, Standard, Enterprise, and Datacenter and Web x64 editions with SP1 Microsoft Windows Server 2008 Foundation, Standard, Enterprise, and Datacenter and Web x86 and x64 editions with SP2 Virtualization Operating Systems Microsoft Hyper-V R2 Server Li
SUU supports the following Dell PowerVault systems running the supported Windows operating system: NX1950,DP500/ NF500, NX300,DL2000,DP100/ NF100,DP600/NF600,NX3000,DL2100,NX3100,DL2200, NX3500,NX200, NX400, NX3200 and NX3300. SUU supports the following EqualLogic systems running the supported Linux and Windows operating system: DX6004S, DX6012S, DX6000G, FS7500, DX6000 Important Notes DUPs for Dell Lifecycle Controller OS Driver packs are no longer available on the Dell OpenManage Server Update ISO.
Type the command, #systemctl restart gdm.service to restart the GDM service. The user will be logged off after running the command. Network firmware (TPF6H) update is failing on Microsoft Windows 2008 x86 operating system. (BITS259131) On Dell’s 10th generation and 11th generation of PowerEdge servers, the Storage Controller Firmware update fails on Linux operating systems if Server Administrator 8.2 installed. (BITS247650) Power Supply firmware (GPWR2) update is failing on SLES 12 and RHEL 7.
TERM signals are not sent to running processes or where running processes do not track these signals) can generate a "/var/lock/.spsetup" lock file that cannot be deleted. SUU reports the update as successful and prompts to reboot the system. When you run SUU again on the same system, the comparison report displays no change in device status. If this situation occurs and no update is in progress, remove "/var/lock/.spsetup" before running another update on the system.
Defect DF452489 - Export comparison report, in the file Dialogbox mouse movements are sluggish To work around the issue, ddd the following line: "*.multiClickTime: 500" to the file ~/.Xdefaults and run xrdb -merge ~/.Xdefaults Defect DF497677 - If an update fails while updating multiple devices of same type, the comparison report shows that the current version is updated for all entries of the selected type.
For information on documentation support, visit support.dell.com/manuals On the Manuals page, click Software>Systems Management. Click on the specific product on the right side to access the documents. THIRD PARTY DISCLAIMER The following disclaimer applies to the "TreeTable" control code in IT Assistant: Copyright 1997, 1998 Sun Microsystems, Inc. All Rights Reserved.
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from him. © 2016 Dell Inc. All rights reserved. This product is protected by U.S.
