User's Manual

Using Dell Performance Resource Optimization Pack 29
2290 Single-bit
ECC error on
controller
DIMM
Warning An error involving a
single bit has been
encountered during a
read or write
operation.
Restrict
2292 Communicati
on with the
enclosure has
been lost
Critical The controller has lost
communication with
an enclosure
management module
(EMM). The cables
may be loose or
defective.
Restrict and
Migrate
2293 EMM
(Enclosure
Management
Module)
Failure
Error The failure may be
caused by a loss of
power to the EMM.
Restrict and
Migrate
2298 The enclosure
has a bad
sensor
Warning The enclosure has a
bad sensor. The
enclosure sensors
monitor the fan
speeds, temperature
probes, and so on.
Restrict
2299 Bad PHY Critical There is a problem
with a physical
connection or PHY.
Restrict
Table 2-1. Alert Cause and Recovery Action
(continued)
Dell Event ID Alert
Description on
SCOM/ SCE
and PRO Tip in
SCVMM
Severity Alert Cause Dell PRO Tip
Recommended
Remedial Action
book.book Page 29 Tuesday, October 4, 2011 6:58 PM