User's Manual

42 Using Dell PRO Pack
2321 Single-bit ECC
error. The
controller
DIMM is
nonfunctional.
There will be no
further
reporting.
Critical The dual in-line
memory module
(DIMM) is
malfunctioning. Data
loss or data corruption
is eminent.
Restrict and Migrate
2322 The DC power
supply is
switched off.
Critical The power supply unit
is switched off. Either a
user switched off the
power supply unit or it
is defective.
Restrict and Migrate
2324 The AC power
supply cable has
been removed.
Critical The power cable may
be pulled out or
removed. The power
cable may also have
overheated and
become warped and
nonfunctional.
Restrict and Migrate
2327 The NVRAM
has corrupted
data. The
controller is
reinitializing the
NVRAM
Warning The NVRAM has
corrupted data. This
may ocurr after a power
surge, a battery failure,
or for other reasons.
The controller is
reinitializing the
NVRAM
Restrict and Migrate
2328 The NVRAM
has corrupt data.
Warning The NVRAM has
corrupt data. The
controller is unable to
correct the situation
Restrict and Migrate
Table 3-1. Alert Cause and Recovery Action
(continued)
Dell
Event
ID
Alert Description
in SCOM/ SCE &
PRO Tip in
SCVMM
Severity Alert Cause Dell PRO Tip
Recommended
Remedial Action
book.book Page 42 Thursday, December 10, 2009 12:36 PM