User's Manual

14 Getting Started With Dell PROPack
The component may still be functioning, but it could potentially fail.
Or, the component may be functioning in an impaired state. A Critical alert is
generated when the component has either failed or failure is imminent.
By default, the monitoring level is set to " Warning and Critical".
To enable ProTips for both Warning and Critical alerts and automatic
implementation of ProTips do the following:
1
Open the SCVMM console.
2 In the Host Groups section, right-click All Hosts and select Properties .
The
Host Groups Properties for All Hosts window appears, as shown in
Figure 2-2.
Figure 2-2. Configuring PRO Tips