Owner's Manual

file:///T|/htdocs/SOFTWARE/smconect/propack/1.0/en/UG/readme/PROMP1_0.txt[10/19/2012 11:04:25 AM]
* DF290310: When you remove Dell PRO Pack Managed system from SCVMM,
the associated alerts and PROTIPs are not removed in SCOM and SCVMM.
Also, the Managed System would not be undiscovered in SCOM.
* DF289065: When you change the PRO configuration in SCVMM, you need
to wait for several minutes to see the PRO settings in effect due
to the time lag involved in SCOM/SCE-SCVMM synchronization.
* DF296984: When you override an “Error” severity monitor to generate
a “Warning” severity alert, the PRO alert filter would not recognize
the override.
* DF293063: SCVMM runs the discovery process every 6 hours by default.
Due to this reason, PRO Tips will not be seen for alerts generated
prior to the discovery process being run.
* DF297601: When you select multiple PRO Tips on SCVMM PRO Tip window
and dismiss them, the SCVMM console may crash.
* DF297123: When you choose to implement multiple PRO Tips during an
alert storm, then some of the PRO Tips may end up in a failed state.
######################################################################
Information in this document is subject to change without notice.
(C) 2008-2009 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission
of Dell Inc. is strictly forbidden.
Trademarks used in this text: "Dell," "OpenManage," and "PowerEdge”
are trademarks of Dell Inc.; "Microsoft," "Windows," and
"Windows Server" are either trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to
refer to either the entities claiming the marks and names or their
products. Dell Inc. disclaims any proprietary interest in trademarks
and trade names other than its own.
May 2009