User's Manual

Getting Started 25
may differ based on your operating system language.) For the two LED
identification tasks, the application path is
C:\Program
Files\Dell\SysMgt\bmc\ipmish.exe
(default BMU Path may
differ based on your operating system language.)
6 For power control tasks, in the Parameters field, enter the command line
parameters in the following format:
•Type
-I lan -H and then choose the Remote Access IP with IPMI
capability
from the drop-down menu.
•Type
-U <username> -P <password> -k <kgkey>
<IPMI Task String>
•Replace <IPMI Task String> with one of the following options:
•
power status (for Check Power Status task)
•
power on (for Power On task)
•
power soft (for Power Off Gracefully task)
•
power off (for Forced Power Off task)
•
power cycle (for Power Cycle task)
•
power reset (for Power Reset task)
•
identify on (for LED Identification On task)
•
identify off (for LED Identification Off task)
A sample command line parameter entry:
-
I lan -H $Target/Property[Type=
"Dell.WindowsServer.Server"]/RemoteAccessIP$ -U
root -P <password> -k <kgkey> power status
7
For LED on or off tasks, enter the command line parameters in
following format:
•Type
-ip and choose the Remote Access IP with IPMI
capability
from drop-down menu.
•Type
-u <username> -p <password> -k <kgkey>
<IPMI task string>.
8
Click Create to create the task and repeat this procedure for each new
BMC task.
book.book Page 25 Wednesday, December 8, 2010 7:33 PM