User's Manual

24 Getting Started
3 To enable server module and chassis slot summary discovery for CMC,
enable the
Dell CMC Slot Discovery rule. It is disabled by default.
4 To enable server module and free slot discovery for DRAC/MC, enable the
Dell DRAC/MC Slot Discovery rule.
NOTE: After the slot discovery, if you remove the link between RunAsAccount
with RunAsProfile, or disable the slot-discovery workflow, the discovered
slots remain with old data.
Creating Advanced Power Control and LED Identification Tasks
Advanced power Control and LED Identification Tasks use the default
BMC credentials, operating system and BMU install path (C:\Program
Files\Dell\SysMgt\bmc), that cannot be modified.
If your systems deviate from these, install BMU 2.0 or later on the
management server and create new console tasks in the Authoring pane
targeted on BMC for Dell Server.
CAUTION: The below steps require you to create a task and give the password
in plaintext. If BMC is not installed on the box, the SCOM Console may display
an error that displays the entire command in a dialog box, and reveals the
password. If you export the created override management pack containing this
task to a disk, you can open the exported management pack in a common text
editor or SCOM Authoring Console and the view the password in plain text.
Create a new task only if absolutely required and consider the above security
aspects before you proceed.
To create a new task:
1
In the Authoring pane, right-click Ta sk s under Management Pack Objects ,
and select
Create new task .
2 In the Task Type screen, select Command line under Console Tasks .
3 Select the destination management pack and click Next .
4 Ty p e Task name , Description , and select Dell Windows Server as the
Ta sk Ta rget
and click Next.
The Command Line screen appears .
5
Type the path of the application ipmitool.exe (the path where BMU was
installed on the management server) in the
Application field. For
example,
C:\Program
Files\Dell\SysMgt\bmc\ipmitool.exe
(default BMU Path
book.book Page 24 Wednesday, December 8, 2010 7:33 PM