Release Notes

file:///T|/htdocs/SOFTWARE/smconect/msscom/41/en/Readme/DellMPv41_Server_Readme.txt[10/23/2012 10:17:18 AM]
installed on SCOM management server in order to carry out the remote
power control tasks. BMC tasks use default credentials including the
default BMC install path (c:\program Files\Dell\SysMgt\bmc).
In OpenManage 5.5 to 6.4, the BMU is included on the "Dell Systems
Management Tools and Documentation DVD".
* If any of the Remote Power Control or LED Identification Control
tasks give you errors, ensure that there is network connectivity
from the BMC NIC of the Dell system and that the BMC is configured
with a valid IP Address and is IPMI-enabled.
For IPMI Shell errors, see the "Dell OpenManage Baseboard Management
Utilities User's Guide" from the "Dell Systems Management Tools and
Documentation DVD" or from the Dell Support website at
"support.dell.com".
* If the DRAC Console launch displays a "Page cannot be displayed"
error, ensure that there is network connectivity from the device
(DRAC/iDRAC card), and that the device is configured with a valid
IP address.
* If attributes or hardware objects are not displayed for Dell systems,
ensure that the CIM Dell namespace is not corrupted and that the Dell
services are not down. Restart the Dell managed system or reinstall
Server Administrator to correct the CIM behavior.
* Remote Power Control tasks, LED Identification Control tasks, and
Clear Agent ESM Log will function only for Dell systems on which a
Dell Agent is installed.
* The Attribute "Enable Correlation" for "Dell Windows Server Physical and
Teamed Relationship Discovery Rule" is set to "False" for all Teamed Network
Interface (Enriched) in the Dell Windows Server (Detailed Edition)
Management Pack. Set the attribute value to "True", to see the relationships
between Physical and Teamed Network Interfaces in the "Complete Diagram
View", "Modular Systems Diagram View" and "Monolithic Servers Diagram View"
Note:- You can set the attribute if required by using overrides
in a custom Management Pack.
* The Performance Rules "Total Transmitted Packets", "Received Bytes",
"Total Received Packets" and "Transmitted Bytes" are disabled by default
for all Physical Network Interface (Enriched) in the Dell Windows Server
(Detailed Edition) Management Pack. Enable these rules to generate
performance statistics for the Physical Network Interfaces.
Note:- You can enable the the above performance rules if
required by using overrides in a custom Management Pack.
* The Performance Rules "Total Transmitted Packets", "Received Bytes",
"Total Received Packets" and "Transmitted Bytes" are disabled by default
for all Teamed Network Interface (Enriched) in the Dell Windows Server
(Detailed Edition) Management Pack. Enable these rules to generate
performance statistics for the Teamed Network Interfaces.